Hansen Brand Coaxial Feeder Cable 7/8” LOW LOSS Type 3A01170028
| Kaho | |||
| mokhanni oa ka hare | thepa | tube e boreleli ea koporo | |
| dia. | 9.30±0.10 limilimithara | ||
| ho kenya letsoho | thepa | PE e phophomang ka mmele | |
| dia. | 22.40±0.40 limilimithara | ||
| sekontiri se kantle | thepa | selikalikoe sa koporo e entsoeng ka masenke | |
| bophara | 25.60±0.30 limilimithara | ||
| baki | thepa | PE kapa PE e thibelang mollo | |
| bophara | 27.90±0.20 limilimithara | ||
| thepa ea mochini | |||
| kobeha radius | lesoha phetoa ho tsamaya | 127 limilimithara 254 limilimithara 500 limilimithara | |
| matla a ho hula | 1590 N | ||
| khanyetso e sithabetseng | 1.4 lik'hilograma/mm | ||
| mocheso o khothalletsoang | PE baki | lebenkele | -70±85°C |
| ho kenya | -40±60°C | ||
| ts'ebetso | -55±85°C | ||
| baki ea PE e thibelang mollo | lebenkele | -30±80°C | |
| ho kenya | -25±60°C | ||
| ts'ebetso | -30±80°C | ||
| thepa ea motlakase | |||
| impedance | 50±2 Ω | ||
| bokhoni | 75 pF/m | ||
| inductance | 0.19 uH/m | ||
| lebelo la ho ata | 87% | ||
| Motlakase oa ho senyeha ha DC | 6.0 kV | ||
| khanyetso ea insulation | >5000 MQ.km | ||
| matla a tlhoro | 91kW | ||
| phokotso ea ho hlahlobisisa | >120 dB | ||
| sekhahla sa ho kgaoha | 5.0 GHz | ||
| attenuation le matla a karolelano | |||
| maqhubu, MHz | sekhahla sa matla@40°C,kW | nom.attenuation@20°C,dB/100m | |
| 200 | 5.05 | 1.67 | |
| 450 | 3.29 | 2.55 | |
| 800 | 2.42 | 3.48 | |
| 900 | 2.26 | 3.7 | |
| 1000 | 2.14 | 3.93 | |
| 1800 | 1.54 | 5.44 | |
| 2000 | 1.46 | 5.77 | |
| 2200 | 1.38 | 6.09 | |
| 2500 | 1.28 | 6.55 | |
| 3000 | 1.15 | 7.27 | |
| boleng bo phahameng ba ho fokotsa e ka ba 105% ea boleng ba lebitso la attenuaiton. | |||
| VSWR | |||
| 690-960MHz | ≤1.12 | ||
| 1700-2200MHz | ≤1.15 | ||
| 2300-2400MHz | ≤1.15 | ||
| litekanyetso | |||
| 2011/65/EU | lumellana | ||
| IEC61196.1-2005 | lumellana | ||
Tšebeliso ea ho paka
Sehokelo sa RF
Mohlala: TEL-4310F.12-RFC
Tlhaloso
4.3-10 Sehokelo sa basali sa 1/2″ thapo ea RF e tenyetsehang
| Lintho tse bonahalang le Plating | |
| Khokahano ea bohareng | Brass / Silver Plating |
| Sesebelisoa sa motlakase | PTFE |
| 'Mele & Kantle Conductor | Brass / alloy e kentsoeng ka motsoako oa tri-alloy |
| Gasket | Rabara ea Silicon |
| Litšobotsi tsa Motlakase | |
| Litšobotsi Impedance | 50 ohm |
| Maqhubu a Range | DC ~ 3 GHz |
| Khanyetso ea Insulation | ≥5000MΩ |
| Matla a Dielectric | ≥2500 V rms |
| Bohanyetsi ba ho kopana le setsi | ≤1.0 mΩ |
| Khanyetso ea ho kopana ka ntle | ≤1.0 mΩ |
| Tahlehelo ea Kenyelletso | ≤0.1dB@3GHz |
| VSWR | ≤1.1@-3.0GHz |
| Boemo ba mocheso | -40 ~ 85 ℃ |
| PIM dBc(2×20W) | ≤-160 dBc(2×20W) |
| Ha e kenele metsi | IP67 |
Litaelo tsa ho kenya N kapa 7 / 16 kapa 4310 1 / 2 ″ cable e feto-fetohang haholo
Sebopeho sa sehokelo: ( Fig1 )
A. nate e ka pele
B. nate ea mokokotlo
C. gasket
Litekanyo tsa ho hlobola li tšoana le setšoantšo (setšoantšo sa 2), tlhokomelo e lokela ho lefshoa ha u ntse u hlobola:
1. Karolo ea ho qetela ea mokhanni ea ka hare e lokela ho chesoa.
2. Tlosa litšila tse kang sekhahla sa koporo le burr karolong e qetellang ea mohala.
Ho kopanya karolo ea ho tiisa: Sekoa karolo ea ho tiisa ka har'a mokhanni oa kantle oa mohala joalo ka ha ho bonts'itsoe setšoantšong (Fig3).
Ho bokella linate tse ka morao (setšoantšo sa 3).
Kopanya nate e ka pele le e ka morao ka ho phunya joalokaha ho bontšitsoe setšoantšong (Figs(5)
1. Pele u korola, tlotsa lera la mafura a tlotsang holim'a selikalikoe sa o.
2. Boloka nate e ka morao le thapo li sa sisinyehe, Sebeletsa holim'a 'mele oa khetla e ka morao.Hlakola 'mele oa khetla e ka morao u sebelisa sepane sa litšoene.Ho kopanya ho felile.
