Silicone Rubber Cold Shrink Tube 7/16 DIN ho isa ho 1/2″ Jumper Cable
Tube e batang ea ho nyenyefatsa ke letoto la matsoho a rabara a bulehileng, a nang le li-tube, a atolositsoeng fekthering 'me a kopanngoa holim'a motheo o tlosoang. Manonyeletso a cable a ho nyenyefatsa a fanoa bakeng sa ho kenngoa tšimong boemong bona bo otlolohileng. Motheo o tlosoa ka mor'a hore tube e behoe bakeng sa ho kenngoa holim'a khokahano ea mohala, lug ea terminal, jj., e leng se lumellang tube ho nyenyefatsa le ho etsa tiiso e sa keneng metsi. Manonyeletso a cable a ho nyenyefatsa a batang a entsoe ka rabara ea EPDM, e se nang li-chloride kapa sebabole. Boholo bo fapaneng ba bophara bo tla koahela mefuta e fapaneng ea likhoele tsa volt tse 1000, koporo le li-conductor tsa aluminium.
Li-Kit tsa Sekoahelo sa Splice sa Telsto Cold Shrink li etselitsoe ho ba mokhoa o bonolo ho o kenya, o bolokehileng le o potlakileng oa ho koahela li-slip ho Spacer Cable. Li-tube ke matsoho a rabara a bulehileng a atolositsoeng fekthering 'me a kopanngoa holim'a li-core tsa polasetiki tse tlosoang. Kamora hore tube e behoe bakeng sa ho kenngoa holim'a splice e moleng, karolo ea mantlha ea tlosoa, ka hona e lumella tube ho honyela le ho koala splice.
» E fana ka tšireletso e ntle ea 'mele le ho koala mongobo bakeng sa lihokelo tsa mehala ea puisano le likhoele
» Kopo e phethahetseng bakeng sa dikgokelo tsa yuniti ya radio e hole
» Litokiso tsa baki ea cable le sheath
» Tšireletso ea ts'enyeho bakeng sa li-fittings le li-coupling
| *Likarolo tsohle tse hlokahalang le litaelo li fanoa ka har'a kit e le 'ngoe |
| *Tlhokomelo e bonolo, e bolokehileng, ha e hloke lisebelisoa |
| *Etsa hore ho be le likhoele tse koahetsoeng tse nang le bophara bo fapaneng ba kantle |
| *Ha ho hlokahale mabone kapa mocheso |
| *E fokotsa haholo nako e hlokahalang ho koahela li-slices ka mekhoa ea setso |
| *E boloka botšepehi ba 'mele le ba motlakase ba mokhanni ea koahetsoeng |
| *E kenyelletsa sleeve ea khatello ea khatello e sa fellang |
Likaroloana
1) Ho hanyetsa boemo ba leholimo bo botle haholo, ho hanyetsa botsofali ba ultraviolet le ho hanyetsa ho halefa ho hoholo ho feta liphaephe tsa ho fokotsa mocheso
2) E hanela ho slab le ho hlaba, ho taboha, asiti le alkali ho feta tube ea silicone e batang ea ho nyenyefatsa
3) Ka nako e le 'ngoe e atoloha le ho fokotseha ka likarolo tsa mosebetsi ntle le libaka tse bulehileng, e tiisa ka thata tikolohong e thata
4) Ho tiisa likarolo tsa mosebetsi ka mokhoa o tsitsitseng tikolohong e nang le moea o fokang
5) E loketse hantle cable e ka tlase ho 1KV
6) E tiisa, e boloka matla le kgatello ya yona esita le ka mora dilemo tse telele tsa botsofali le ho pepesehela.
7) Ho kenya ho bonolo, ho bolokehile, ha ho hloke lisebelisoa kapa koetliso e khethehileng. Ha ho hlokahale mabone kapa mosebetsi oa ho futhumatsa
8) Ho fokotseha ha bophara: ≥50%
9) Sehlopha sa ho tiisa IP68
Lintlha tsa Tekheniki
| Matlo | Lintlha tse Tloaelehileng | Mokhoa oa teko | ||
| HS | 49 A | ASTM D 2240 | ||
| Matla a tšepe | 11.8 MPa | GB/T 528 | ||
| Ho lelefatsa nako ea khefu | 641% | GB/T 528 | ||
| Matla a ho Meokho | 38.6 N/ mm | ASTM D 624 | ||
| Matla a Dielectric | 19.1 kV/mm | ASTM D 149 | ||
| Li-constant tsa Dielectric | 5 | 90℃ (ka metsing) matsatsi a 7 (1940F) 5.6 | ||
| Anti-enzyme (libaktheria) | Ho pepesehela matsatsi a 28 ntle le kholo | ASTM G-21 | ||
| Hanela UV | Mahlaseli a UV a lihora tse 2000 ntle le ho tsofala | ASTM G-53 | ||
| Sehlahisoa | Bophara ba ka Hare ba Tube (mm) | Mefuta ea cable (mm) | ||
| Silicone Cold Shrink Tube | φ15 | φ4-11 | ||
| φ20 | φ5-16 | |||
| φ25 | φ6-21 | |||
| φ28 | φ6-24 | |||
| φ30 | φ7-26 | |||
| φ32 | φ8-28 | |||
| φ35 | φ8-31 | |||
| φ40 | φ10-36 | |||
| φ45 | φ11-41 | |||
| φ52 | φ11.5-46 | |||
| φ56 | φ12.5-50 | |||
| Litlhaloso: |
| |||
| Bophara ba tube le bolelele ba tube li ka etsoa ka mokhoa o ikhethileng ho latela litlhoko tsa moreki. | ||||
